Clock Functions - AEG BP5014321 User Manual

12 www.aeg.com
3. Open the oven door and put the
connector (B) into the outlet valve
(A).
4. Push the connector again and again
when you empty the water tank.
The water tank can have
some water when the
display shows
symbol. Wait until the
water flow from the
water outlet valve stops.

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
Press
switch between the clock
functions.
To confirm the settings of
the clock functions, press
or wait 5 seconds for an
automatic confirmation.
6.2 Setting the DURATION or
END
1. Set an oven function.
2. Press
display shows
or flashes in the display.
TIME OF DAY
MINUTE MINDER
DURATION
END
again and again to
again and again until the
or .
5. Remove the connector from the valve
when the water stops flowing.
Application
To set, change or check the time of day. Refer to "Set-
ting the time".
Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any time,
also if the appliance is off.
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
3. Press
and press
For Duration
and then the hours, for End
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
and time setting flash in the display. The
oven stops.
4. Press any button to stop the acoustic
signal.
5. Turn the knob for the oven functions
to the off position.
Do not use the drained
water to fill the water tank
again.
or to the set the values
to confirm.
first you set the minutes
or
first you
symbol