Audio Keywords In The Software Initialisation Configuration File - HP ® xw9400 Setup Manual

4 Setting Up Audio Hardware
Menu
Route
Sync
System
Miscellany

Audio Keywords in the Software Initialisation Configuration File

There are two keywords in the software initialisation file (by default, init.cfg) that must be
uncommented and set to the correct values to ensure Discreet Native Audio works properly. The
first, Audiodevice, enables Discreet Native Audio. The second, MidiDevice, determines
whether control of the Lucid converter is remote or local.
Keyword:
Audiodevice
MidiDevice
For additional information on these keywords and help setting them, see the Configuration File
Reference Guide for Linux Workstations.
36
Menu Item
For analog audio:
AES INs --> ADAT OUTs
Analog INs --> AES OUTs
AES INs --> Analog OUTs
For digital audio:
AES INs --> ADAT OUTs
AES INs --> AES OUTs
AES INs --> ANALOG OUT
Internal OFF
External AES 1+2
Route Unit: 8
Setting:
AJA
If you are using local control of the converter, comment out this
keyword.
If you are using remote control of the converter, uncomment the
keyword, set the serial port parameter to /dev/ttyS1 and leave all
other parameters set to their default value.
Comment
If these options do not appear, verify
that Route Unit (in the System,
Miscellany menu) is set to 8.
External AES 1+2 is the recommended
setting.