Globalbusstatefield For Profinet Io - Panasonic FP7 User Manual

4.3.1.4 GlobalBusStateField for PROFINET IO

FP7 Fieldbus Master Units Technical Manual
ErrEvent Explanation
210 No database.
212 Faulty reading of a
database.
220 Host watchdog er-
ror.
The following error numbers are valid for the error event if "Error remote
address" is not equal to 255.
ErrEvent Explanation
30 Guarding failed.
31 Node has changed its state
and is no longer operational.
32 Sequence error in guarding
protocol.
33 No response to a configured
remote frame PDO.
34 No response of the node while
being configured.
35 The node profile number con-
figured in the master differs
from the actual node profile
number.
36 The device type configured in
the master differs from the
actual node device type.
37 Unknown SDO response re-
ceived.
38 Length indicator of received
SDO message does not equal
8.
39 Node not handled. Node
stopped.
Source of Recommendation
error
Project plan- Download database again.
ning
Device Download database again.
Host pro- Check user program or watchdog
gram timer.
Source of Recommendation
error
Node Check whether node is con-
nected.
Node Reset node.
Node Reset node.
Node Check whether node can
handle remote frames.
Node Check whether node is con-
nected and operational.
Project Check the supported profile
planning number of the node: I/O,
encoder, etc.
Project Check the supported ser-
planning vices of the node.
Node Node not compatible with
CiA protocol specification.
Node Node not compatible with
CiA protocol specification.
Device Activated auto-clear mode or
host is not ready.
Programming information
37