Fp7 Canopen Master; Fp7 Profinet Io-Controller; Wiring Of The Fp7 Fmu - Panasonic FP7 User Manual

Installation and wiring

3.4.3 FP7 CANopen Master

3.4.4 FP7 PROFINET IO-Controller

3.5 Wiring of the FP7 FMU

Accessory terminal block
22
4. Insert each conductor into the appropriate clamping cavity of the open
style connector or the screw terminal on the device, according to the
color of the cable insulation:
Wire color
White
Blue
Bare
Black
Red
5. Tighten the clamping screws to secure each conductor
The male contacts of the device connector must match the female con-
tacts of the connector.
Use a standard CANopen cable and standard 9-pin Sub-D female CANopen
connectors.
Use a standard PROFINET cable and standard Ethernet connectors.
The FP7-FMU has a screw terminal on its front side to connect to function
earth. Use the following items for wiring.
If additional connectors are needed, use the connector manufactured by
Phoenix Contact.
No. of contacts
2
Wire identity
CAN_H
CAN_L
Drain
V-
V+
Phoenix Contact product ID
Model no.
MC 1.5/2-ST-5.08
FP7 Fieldbus Master Units Technical Manual
Usage
Signal
Signal
Shield
Power
Power
Product no.
18 36 07 9