Installation And Wiring; Installation Environment And Space - Panasonic FP7 User Manual

Chapter 3

3.1 Installation environment and space

Operating environment
FP7 Fieldbus Master Units Technical Manual
After installing the unit, make sure to use it within the range of the general
specifications:
 Operating temperature: 0–+55°C
 Operating humidity: 10%–95% RH (at 25°C, non-condensing)
 Pollution degree: 2
 Maximum altitude: 2000m
 Equipment class: 1
 Overvoltage category: II
Be sure to install the unit in locations designed for electrical equipment,
e.g. in a closed metal cabinet such as a switch cabinet.
Do not use the unit in the following environments:
 Direct sunlight
 Sudden temperature changes causing condensation
 Inflammable or corrosive gases
 Excessive airborne dust, metal particles or salts
 Benzine, paint thinner, alcohol or other organic solvents, or strong alka-
line solutions such as ammonia or caustic soda
 Vibration, shock, or direct drop of water
 Influence from power transmission lines, high voltage equipment, power
cables, power equipment, radio transmitters, or any other equipment
that would generate high switching surges. Maintain at least 100mm of
space between these devices and the unit.

Installation and wiring

Installation and wiring
13