System Configuration And Menu Options; Root Menus - Toshiba P9 ASD Quick Start Manual

System Configuration and Menu Options

Root Menus

The Mode key accesses the three primary modes of the P9 ASD: the Frequency Command mode, the
Monitor mode, and the Program mode. From either mode, press the Mode key to loop through to the
other two modes (See
toggles the menu to and from the EOI Command mode and the Frequency Command mode.
The Alarm or Fault information will be displayed in the event of an active Alarm or Fault. Alarm text
will be displayed on the Frequency Command screen and on the LED screen when active. Fault
information will be displayed via the Fault screen. See
on Alarms and Trips.
Figure 26. P9 ASD Root Menu Navigation.
Frequency Command Mode
Frequency Setting
While operating in the Hand mode (Hand LED is illuminated on the EOI), the running frequency of the
motor may be set from the Frequency Command screen. Using the Rotary Encoder, enter the
Frequency Command value, connect ST to CC, and provide a Run command (F and/or R) and then
press the Run key. The motor will run at the Frequency Command speed and may be changed while
running. See
Command mode.
P9 ASD Quick Start Guide
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www .ctiautomation.net - Email: info@ctiautomation.net
Figure 26). While in the Frequency Command mode, pressing the ESC key
Frequency
Command
Mode
EOI Command
Mode
Figure 22 on pg. 28 and Operation (Hand) on pg. 32
Alarms and Trips on pg. 69
Program
Monitor
Mode
Mode
for more information on the Frequency
for more information
35