Toshiba P9 ASD Quick Start Manual page 75

Figure 31. Complete the VLP Setup.
16. Press the Stop key to complete
17. Click Exit to save settings
Figure 32. Run the Motor/Pump in the Direct Mode.
18. From the Frequency
19. While in the Hand mode, and
20. During operation, adjust
P9 ASD Quick Start Guide
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www .ctiautomation.net - Email: info@ctiautomation.net
the VLP setup.
(Exit available at zero Hz).
Command screen press ESC,
scroll to the VLP Control field,
and select Direct Mode if using
no feedback (if using feedback
go to Step 21. on pg. 68).
from the Frequency Command
screen, press Run.
parameters and to
F500 F501
stabilize VLP operation if
unstable.
VLP Setup Wizard
Back Next
Press [STOP]
Virtual Linear Pump Setup
Is Now Complete
Press ESC
Exit
67