Advertisement
Installation Instructions for IDH Max 1300 Mortise Locks
Outside of door
Figure 16b Installing the levers
Core
Control key
Figure 17 Installing the core
16
Set screw
Spindles
Inside of door
Inside of door
BEST ACCESS SYSTEMS
A Division of Stanley Security Solutions, Inc
Completing the installation at the door
2 Slide the inside knob onto the inside spindle and
secure it with the set screw.
3 Push the set screw cap into the set screw hole.
4 Tighten the trim mounting screws.
5 Turn the knobs to check that they operate smoothly.
For levers
1 With the handle pointing toward the door hinges,
insert the outside lever and spindles assembly into the
lock from the outside of the door.
2 Slide the inside lever onto the inside spindle and
secure it with the set screw.
3 Tighten the trim mounting screws.
4 Turn the levers to check that they operate smoothly.
17
Install core (EEL and EEU only)
1 Insert the control key into the core and rotate the key
15 degrees to the right.
2 With the control key in the core, insert the core into
the cylinder.
3 Rotate the control key 15 degrees to the left and with-
draw the key.
Caution: The control key can be used to remove
cores and to access doors. Provide adequate secu-
rity for the control key.
Hide quick links:
Advertisement
