Best IDH Max 1300 Installation Instructions Manual page 11

Installing the lock
12
Install trim hole inserts and bushings
1 Insert the two trim hole inserts into the upper trim
hole on each side of the door, as shown in Figure 12.
2 Insert two bushings into the field harness & reader
wire hole on each side of the door, as shown in
Figure 12.
3 Insert a bushing into the sensor & solenoid wire hole
on the inside of the door, as shown in Figure 12.
Installation Instructions for IDH Max 1300 Mortise Locks Installation Instructions for IDH Max 1300 Mortise Locks
Outside of door
Figure 12 Installing the trim hole inserts and bushings
BEST ACCESS SYSTEMS
A Division of Stanley Security Solutions, Inc
Trim hole
insert
Bushing
Trim hole
insert
Bushings
Inside of door
11