Table of Contents
Advertisement
Installation instructions
Installation
These instructions are aimed at qualified fitters as a guide to installation, adjustment and maintenance
in compliance with the laws and standards in force. The operations must always be carried out with the
appliance disconnected from the electricity supply.
This appliance is not provided with a combustion product discharge. It is recommended that it be
installed insufficiently aerated places, in terms of the laws in force. The quantity of air which is necessary
GB
for combustion must not be below 2.0 m
Positioning (Fig. 6-7)
The appliance is made to be fitted into a counter top, as show in the figure. Apply the sealant supplied
around the whole perimeter of the hob. Installation over an oven is not recommended, but if this is
necessary, check that:
- the oven has an efficient cooling system;
- there is no passage of hot air from the oven to the hob;
- allow air passages as shown in the figure.
/h for each kW of installed power. See table of burner power.
3
14
Fig. 6
Fig. 7
Advertisement
Table of Contents
