Before Operating the Handset
Selecting the Fwd/DND Icon
When the handset is connected to a KX-TAW848/KX-TDA series (KX-TDA50/100/200)
PBX and the PT LED patterns for Fwd and DND have been set reversely on the PBX, you
should change this setting to Mode 2.
Press the
Joystick.
Press the Joystick.
Enabling the Outgoing Call Log
The default setting is "Off" for the Outgoing Call Log. You can enable the Outgoing Call
Log if needed.
Press the
Joystick.
Select
"Outgoing Log".
• Only the numbers you dial, or numbers dialed using Hot Key Dial or Phonebook
will be stored in the Outgoing Call Log.
6
Select "
Setting
Base".
Select "Mode 2".
Select "
Setting
Handset".
Press the
Joystick.
Press the
Select "Fwd/DND Icon".
Joystick.
Press the Joystick.
Press the
Select "Other
Joystick.
Option".
Enter Password
----
Enter your password.
(default: 1234)
Press the
Joystick.
Select "On".
Press the
Joystick.