Panasonic KX-TDA100 User Manual page 17

Desired Function
1
*
Redial
One-touch
Dialing
Calling an
operator
Speed Dialing
(Personal)
Speed Dialing
(System)
Calling back
a caller using
the Incoming
Call Log
1
* You can use the last number stored in the PBX to make calls (Last Number Redial).
However, in this case the number will not be stored as a new entry in the Outgoing Call Log.
Operation for KX-TAW848/TDA50/100/200
To program
0
To dial
0
To store
To dial
To dial
To program
0
To dial
Call Log Key
Call Log Key
* Caller ID is displayed for about 5 seconds. If you press
the display goes blank until the time expires. While Caller ID is displayed or the display is blank,
you cannot receive a call, make a call using
To return to the standby display, press
Operation
Making Calls
1
X
idle F-Key (0-9, , #)
OR
idle F-Key
X
One-touch Dialing Key (0-9, , #)
OR
One-touch Dialing Key
personal speed
0
dial no.
2
2
system speed dial no.
X
idle F-Key (0-9, , #)
OR
idle F-Key
X
(0-9, , #)
OR
desired Incoming
Call Log *
then press
1
OR
phone no.
2
desired no.
personal speed
dial no.
5 4
Assign as Call Log
during that time period,
or enter PBX Personal Programming mode.
.
Talk on the
Speakerphone.
#
17