Panasonic KX-TDA100 User Manual page 34

Setting the Handset and Base Unit
Main Item
PBX Type
Fwd/DND Icon
Caller ID Line
"PBX Type-Type 1
(KX-TAW/TDA series)"
only
Date&Time
"PBX Type-Type 2
(KX-TA308/TD
series)" only
Incoming Log
"PBX Type-Type 2
(KX-TA308/TD
series)" only
1
* After you set the PBX type, disconnect and reconnect the telephone cord.
2
* To check the type of PBX you are using, see page 30.
3
* When a check mark is displayed beside a tone type, the incoming call log for that tone type
will be logged.
• These settings are only applied to your telephone, not the PBX itself.
34
Description
Selects the type of PBX that
the base unit is connected to.*
When using a KX-TAW848/KX-
TDA series PBX, and the PT LED
patterns for FWD and DND have
been set reversely on the PBX, you
need to set Mode 2. (See
Selects which line of information is
displayed as Caller ID. When the
Caller ID matches an item stored in
the Phonebook, the handset rings
according to the setting of the item.
As shown below, a caller's
number, caller's name and CO line
number are displayed on each line.
Displayed items vary depending on
your PBX and its settings.
<Example>
1st Line
T.Edison
2nd Line
01234567890
LN-001:
3rd Line
Sets the current date and time
for the base unit.
Sets each type of Incoming
Call Log to either on or off.*
You must set at least one of the
incoming call types to on to
store a received call in the
Incoming Call Log.
Setting
Type 1*
1
Type 2
Mode 1
Mode 2
page 6.)
1st Line
2nd Line
3rd Line
Date
Time
Single Tone
3
On
Off
Double Tone
On
Off
Triple Tone
On
Off
Default
2
Type 1
Mode 1
1st Line
01-01-05 (D-M-Y)
12:00 AM (H:M)
Single Tone: Off
Double Tone: Off
Triple Tone: Off