Adjusting The Vibrate Setting; Adjusting The Receiver/Speaker/Headset Volume - Panasonic KX-TDA100 User Manual

Adjusting the Vibrate Setting

Press the Select "
Joystick.
Setting Handset".
Select
"Vibrate".
• You can receive an intercom call by the caller's voice instead of rings (Voice
Call). For further information, refer to "Alternate Receiving—Ring/Voice" in the
user documentation for your PBX.
• To set Vibrate only, without ringing, turn Meeting Mode on or set the Ringer
Volume to off. (See page 8.)

Adjusting the Receiver/Speaker/Headset Volume

During a conversation
Move the Joystick UP or DOWN to adjust the volume.
(Receiver Volume-Level 1-4, Speaker Volume-Level 1-6, Headset Volume-Level 1-4)
Before Operating the Handset
Press the
Joystick.
Press the Select the desired setting.
Joystick. (Vib.& Ring / Vib.
Select "Incoming
Option".
Press the
Ring / Off)
Joystick.
Press the
Joystick.
9