Table of Contents
Advertisement
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
CPE Advanced Information
To view the CPE Advanced Information menu, click CPE Management > CPE Advanced Information.
Select the CPE unit to be configured with the pull-down line menu and click on the Display button. The status of the
line is displayed along with packet counters for the WAN, LAN and Wireless interfaces. The following parameters are
configured in the CPE Advanced Information menu:
Parameter
Wireless Port Status
NAT Status
IGMP Snooping
Status
VoIP Status
Click on the Apply button for the menu parameter being set to set these configurations in the memory of the switch.
Figure 145. CPE Advanced Information menu
Description
Choose to enable or disable the wireless interface (if applicable) and click on the Apply
button. Default = Disabled
Choose to enable or disable NAT for the CPE and click on Apply. Default = Enabled
Choose the Connection to which the IGMP Snooping settings are applied, then choose
enable or disable IGMP Snooping (default = Enabled). Additionally an IGMP Proxy can be
enabled or disabled (default = Disabled).
Enter VoIP account settings including Name and Password. Enter the VoIP Sever IP
address and click on Apply.
124
Hide quick links:
Advertisement
Table of Contents
