D-Link DAS-3626 User Manual page 23

Enter the Old Password for the account, the New Password you wish to use, and retype the new password in the
Confirm Password field. Use the drop-down menu to select the type of encryption (Default, Plain Text or Sha 1), and
click Apply.
Admin, Operator and User Privileges
Recently added to the levels of security offered on the switch, the Operator level privilege will allow users to configure
and view configurations on the switch, except for those involving security features, which are still left to the Admin
privilege. Operator users can be authenticated through either the local authentication method of the switch, or through
the Access Authentication Control feature, discussed later in this document. Once the user has logged in to the switch
in the Operator level, certain security screens and windows will not be made available to view, or to configure. Only
Admin level users have access to these features.
There are three levels of user privileges, Admin, Operator and User. Some menu selections available to users with
Admin privileges may not be available to those with User or Operator privileges.
The following table summarizes the Admin, Operator and User privileges:
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration Files
System Utilities
Factory Reset
User Account Management
Add/Update/Delete User Accounts
View User Accounts
DAS-3626 VDSL2 Switch User Manual
Figure 25. User Accounts menu
NOTICE: In case of lost passwords or password corruption, please refer to the
D-Link website and the White Paper entitled "Password Recovery Procedure",
which will guide you through the steps necessary to resolve this issue.
Figure 26. Admin, Operator and User Privileges
Admin
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
23
Operator User
Yes Read-only
Yes Read-only
Yes Read-only
No No
Yes No
No No
No No
No No