Table of Contents
Advertisement
2. PERIODICAL MAINTENANCE PROCEDURE
2.1.2
Replacing the punch clutch (CL1)
A. Periodical replaced parts/cycle
• Punch clutch: Every 1,000,000 counts
B. Procedure
1. Remove the Z folding unit.
See P.14
2. Remove the punch unit.
See P.17
[2]
[1]
[3]
[4]
[1]
6
[1]
A07TF2C023DA
[1]
[2]
[2]
A07TF2C024DA
[1]
[2]
A07TF2C012DA
Service Manual
Field Service Ver. 1.0 Jul. 2009
3. Cut three wiring harness bands [1].
NOTE
• When bind the wiring harness band
[1], face them to the arrow-marked
direction [2] to avoid the contact
with the conveyance section of the
main body.
4. Remove two screws [1], and remove
the punch motor assy [2].
NOTE
• When reinstalling the punch motor
assy [2], press the punch motor
gear [3] to the gear [4]. Be sure to
check that the gears rotate
smoothly and there is appropriate
backlash.
Y111420-1
Advertisement
Table of Contents
