Field Service Ver. 1.0 Jul. 2009
MAINTENANCE
2.
PERIODICAL MAINTENANCE PROCEDURE
2.1
Punch section
2.1.1
Replacing the punch scraps conveyance motor (M7)
A. Periodical replaced parts/cycle
• Punch scraps conveyance motor: Every 1,000,000 counts
B. Procedure
1. Remove the Z folding unit.
See P.14
[2]
[1]
4. Reinstall the above parts following the removal steps in reverse.
Y111420-1
2. PERIODICAL MAINTENANCE PROCEDURE
[3]
[1]
A07TF2C511DA
[2]
A07TF2C011DA
Service Manual
2. Disconnect the connector [1] and
remove two screws [2], and remove
the punch scraps conveyance motor
assy [3].
3. Remove two screws [1], and remove
the punch scraps conveyance motor
[2].
5