Punch Clutch (Cl1) - Olivetti ZU-603 Service Manual

Field Service Ver. 2.0 May 2008
2.3.13

Punch clutch (CL1)

1. Remove the Z folding unit.
See P.13
2. Remove the punch unit.
See P.16
[2]
[1]
[3]
[4] [1]
Y107910-0
[1]
A07TF2C023DA
[1]
[2]
[2]
A07TF2C024DA
[1]
[2]
A07TF2C012DA
Service Manual
3. Cut three wiring harness bands [1].
NOTE
• When bind the wiring harness band
[1], face them to the arrow-marked
direction [2] to avoid the contact
with the conveyance section of the
main body.
4. Remove two screws [1], and remove
the punch motor assy [2].
NOTE
• When reinstalling the punch motor
assy [2], press the punch motor
gear [3] to the gear [4]. Be sure to
check that the gears rotate
smoothly and there is appropriate
backlash.
2. Other
25