Punch Motor (M4) - Olivetti ZU-606 Service Manual

3. OTHER MAINTENANCE ITEM
3.3.8

Punch motor (M4)

1. Remove the Z folding unit.
See P.14
2. Remove the punch unit.
See P.17
[3]
[4] [1]
[3]
5. Reinstall the above parts following the removal steps in reverse.
20
[1]
[2]
A07TF2C012DA
[2]
[1]
A07TF2C013DA
Service Manual
Field Service Ver. 1.0 Jul. 2009
3. Remove two screws [1], and remove
the punch motor assy [2].
NOTE
• When reinstalling the punch motor
assy [2], press the punch motor
gear [3] to the gear [4]. Be sure to
check that the gears rotate
smoothly and there is appropriate
backlash.
4. Remove two screws [1] and discon-
nect the connector [2], and remove
the punch motor [3].
Y111420-1