Table of Contents
Advertisement
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library Installation Guide
Document 6423015-01, Ver. 1, Rel. 0
June 2002
Installing Drives in the Library
Installing Tape Drives
in an L25
Figure 11 Installing a Tape
Drive in an L25 Library
18
This section explains how to install tape drives in the library. You will
need a TORX
procedure.
To install tape drives in an L25:
0
At the back of the library, use a TORX T-20 screwdriver to remove
1
the cover plate protecting the drive bay in which you will install
the tape drive.
Insert the tape drive into the drive bay slowly until the connectors
2
are seated (see
Tighten the tape drive thumbscrew using a flat blade screwdriver.
3
Repeat steps
4
Tape drive
Thumbscrew
Installing Drives in the Library
®
T-20 screwdriver and a flat blade screwdriver for this
figure
11).
1
through
3
to install another tape drive, if desired.
0
Advertisement
Table of Contents
