Operating mode 'Slave'
7.5 Device settings menu
Pan inversion
This setting is only relevant if the device is working as Slave in a Master / Slave configuration
and is not controlled via DMX.
Select the option 'Run Mode' from the main menu. The mode selecting menu opens up. Use
[UP] and [DOWN] to select the option 'Slave' and press [ENTER]. The device is now controlled
by another connected device, which is configured as Master.
Select the option 'Setup' from the main menu. The Device settings menu opens up. Use [UP]
and [DOWN] to select the option 'Pan Reverse' and press [ENTER]. With [UP] and [DOWN] you
can now choose between 'ON' (reverse rotational direction) and 'OFF' (normal rotational
direction).
When the display shows the desired value press [ENTER] to confirm the setting and then
[MODE/ESC] to return to the main menu. To close the menu item without making changes,
press [MODE/ESC].
MH-z720 Quad LED Wash Zoom
Operating
33