Operating
Operating mode 'Preprog‐
rammed automatic show'
Sound control
32
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Select the option 'Run Mode' from the main menu. The mode selecting menu opens up. Use
[UP] and [DOWN] to select the option 'Auto' . Press [ENTER] to open this menu item. With [UP]
and [DOWN] you can now select one of 16 automatic shows. When the display shows the
desired value press [ENTER] to confirm the setting and then [MODE/ESC] to return to the main
menu. To close the menu item without making changes, press [MODE/ESC].
The sound controlled automatic show can only be activated when the unit is operating in
stand alone mode or as master in a master / slave combination. This setting is only relevant if
the device is not controlled via DMX.
Select the option 'Run Mode' from the main menu. The mode selecting menu opens up. Use
[UP] and [DOWN] to select the option 'Sound' and press [ENTER] to start the sound-controlled
automatic show.
moving head