Stairville MH-z720 Quad LED Wash Zoom User Manual page 38

Operating
Dimmer curve
38
This setting is only relevant if the device is controlled via DMX.
Select the option 'Setup' from the main menu. The Device settings menu opens up. Use [UP]
and [DOWN] to select the option 'Dimmer Curve' and press [ENTER]. With [UP] and [DOWN] you
can now select one of the following dimmer curves: The dimmer curve determines how the
brightness increases or decreases depending on the set DMX value.
When the display shows the desired value press [ENTER] to confirm the setting and then
[MODE/ESC] to return to the main menu. To close the menu item without making changes,
press [MODE/ESC].
Display
'Linear'
'SCurve'
'I Squa'
'Square'
moving head
Description
Linear (proportional) course
Non-linear curve with a distinctive flat profile at the
beginning and end
Inverted quadratic curve with a steep profile at the
beginning and flat profile at the end
Inverted square curve with a steep profile at the begin‐
ning and flat profile at the end