Operating; Starting The Device; Main Menu - Stairville LED Flood TRI Panel 7x3W RGB User Manual

Operating

7 Operating

7.1 Starting the device

7.2 Main menu

LED Flood TRI Panel 7x3W RGB
26
LED Floodlight
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
Press [MODE] to activate the main menu and select an operating mode. Use the [Up] and
[Down] buttons to change the respectively displayed value. When the display shows the
desired value, press [MODE].
If you don't press any button for about 20 seconds, the unit returns to the previously selected
mode. The set values are retained even when the device is disconnected from the mains
power supply.