Activating / Deactivating The; Selecting The Display Language; Setting The Ringer - DETEWE OPENPHONE 52 User Manual

Programming
remains active.
The factory setting is 0000. This
means that a PIN entry is not
requested for any setting change. If
you want to remove an existing PIN,
enter and confirm 0000 as the new
PIN. The PIN is then deactivated.
Activating / Deactivating
the Function Key Click
You have the option of setting your
OpenPhone 52 so that the speaker
emits a small clicking sound when a
key is pressed, which should make
entering information easier.
Menu
Press the softkey.
Using the arrow keys, call the
Trminal
function up on the dis-
play and then press the correspon-
ding softkey.
ClckOff ClckOn
Select the or
softkey.
Depending on whether the key click
Clck-
function is active or not the
Off ClckOn
or softkey is dis-
played.
34
Key Click / Display Language
Selecting the Display
Language
All messages can be displayed in
different languages. The factory set-
ting is German 'as the telephone
was made in Germany'.
Menu
Press the softkey.
Using the arrow keys, call the
Trminal
function up on the dis-
play and then press the correspon-
ding softkey.
Lang
Select the . softkey.
Use the arrow keys to select the
desired language and then press
the corresponding softkey, e.g.
English
.

Setting the Ringer

You can set the tone and volume of
the ringer. Two special tone options
are available exclusively on this ter-
minal.
Menu
Press the softkey.
Using the arrow keys, call the
Trminal
function up on the dis-
play and then press the correspon-
ding softkey.
Melody
Select the softkey.
The MSN display appears.
OK
Confirm your entry with the
softkey
or
select a different MSN.
≠ } ±
Use the digit keys to , and
to select a tone option.
Use the arrow keys to adjust the
volume.
OK
Confirm this by pressing the
softkey.
Restoring to Factory Set-
tings
If necessary you can restore the ter-
minal to its factory settings.
Menu
Press the softkey.
Using the arrow keys, call the
Trminal
function up on the dis-
Setting the Ringer / Factory Settings
Programming
play and then press the correspon-
ding softkey.
Reset
Select the softkey.
: Restoring the terminal to the
NB
factory settings deletes all existing
settings. The display language is
restored to German, the telephone
book is deleted, and all pro-
grammed MSNs are lost.
Settings which affect your ISDN line
but not your terminal are not delet-
ed when the terminal is reset. If a
call diversion is active, you cannot
restore the terminal to factory set-
tings. The call diversion must first
be deactivated.
35