Deleting A Call Diversion; Programming Your Telephone - DETEWE OPENPHONE 52 User Manual

Features

Deleting a Call Diversion

Menu
Press the softkey.
ISDN
Using the arrow keys, call the
function up on the display and then
press the corresponding softkey.
Con-
Select Call Diversion with the
tinu
softkey. Now use the arrow
≤ ≥
keys to select the MSN you
want to delete the call diversion for
OK
and press the softkey.
The display now shows the active
≥
call diversion details. Press the
arrow key.
If you have diverted all services, you
will see details of the different serv-
ices in order and then the menu.
Delete
Press the softkey.
Now select which services should no
longer be diverted. If you select
All
the call diversions for all services are
deleted.
Now confirm which call diversion
variant should be deleted. You must
enter a variant here which is actual-
ly active.
: The ISDN deals with all three
NB
call diversion variants (
uncondition-
, , ) separately. This
al delayed on busy
means that you must delete the
variant which is actually active.
30
Deleting a Call Diversion
,

Programming Your Telephone

General
Your OpenPhone 52 has been pre-
programmed to allow you to make
calls immediately.
To benefit from the full range of
ISDN and OpenPhone 52 features,
however, you must carry out your
own settings where necessary. All
settings saved in the terminal are
referred to as "Programming".
All programming is carried out in
the terminal's idle state, i.e. on-
hook.
All programming except for Note-
book and Volume programming
Menu
always begins with the soft-
key on the idle display.
Some of these settings are protect-
ed by a PIN: only those who know
the PIN can edit the setting. The fac-
tory setting is 0000 (all settings can
be edited).
The individual setting options are
described on the following pages.
Programming
31
General