Fujitsu LPF-D711W User Manual page 8

ADDITIONAL PRECAUTIONS (Continued)
ILLUMINATION NEAR THE PROJECTOR UNIT
Both the projector and AV selector have a signal receiver for the wireless remote control on their front. If a strong light such as fluorescent
light strikes upon the signal receivers, the wireless remote control may not work properly. In that case, keep the projector unit away from
the illumination source such as fluorescent light, or re-install it at a place where light will not directly strike on the signal.
To keep the projector unit away from the illumination source:
As a guideline, keep the projector unit more than 2 m away from the illumination
source such as fluorescent light. Also, check that the signal receivers are not
exposed to direct sunlight.
PICTURE CHARACTERISTICS
This projector unit uses an LCD panel to project pictures on the screen. Please note, therefore, that the projected picture may differ from
that of the CRT indicator lamp of television and personal computer in color tone and contrast.
PROJECTION SCREEN
When purchasing a projection screen, carefully check the characteristics to select one that best suits your purpose of use. Do not use a
polarizing screen with the projector unit. The screen may be tinged with red.
USE OF A MOBILE PHONE NEAR THE PROJECTION UNIT
Using a mobile phone, transceiver and other device emitting radio waves near the projector unit may disturb the picture. When using those
devices, keep a sufficient distance from the projector unit.
E-8
Downloaded From projector-manual.com Fujitsu Manuals
Illumination source
More than
2 m