Fujitsu LPF-D711W User Manual page 32

BASIC OPERATIONS (Continued)
ADJUSTING THE RECTANGULAR DISTORTION OF THE PICTURE
* You can also use the buttons on
the projector's control panel to
perform these steps.
Note
• Adjustment of either of the vertical or horizontal axis restricts the adjustment range of the other. (For example, if the horizontal axis is adjusted to the
maximum level. adjustment of the vertical axis will be made impossible.)
• Adjustment with the Keystone button may cause change the aspect ratio. In this case, correct the aspect ratio by adjusting the size.
E-32
Downloaded From projector-manual.com Fujitsu Manuals
1
Press .
The adjustment menu display appears.
2
Press to select "Correct Keystone".
3
Press .
The adjustment display appears.
4
Press
rectangular distortion of the picture.
Pressing corrects the distortion of the upper
portion of the picture.
Pressing corrects the distortion of the lower
portion of the picture.
Pressing corrects the distortion of the left side
portion of the picture.
Pressing corrects the distortion of the right side
portion of the picture.
5
Press to register the adjustment
result.
to adjust the
Installation menu screen