Fujitsu LPF-D711W User Manual page 49

SETTING THE INPUT TERMINALS
• Selecting the settings of Video Input terminal (VIDEO1-4)
Select the video input format.
Each time
Auto
[Auto]: The terminal to which the signal is input is autmatically recognized.
[Other than Auto]: Select the desired input.
Press to store.
* When Auto is selected, and multiple inputs are present, the inputs will have priority in the order of
Component Video, S-video, and Video.
* Component video input is not made to Video 3.
Video Format
You can use this option to select the video format appropriate for the input signal.
Each time you press
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press to store.
Downloaded From projector-manual.com Fujitsu Manuals
is pressed, the setting is switched.
Video S-video Comp. video
or , one of the available modes appears in the following sequence:
Input Terminal Settings Screen
E-49