Table of Contents
Advertisement
Setting Image Enhance (Valid in the DVI-D mode only)
This performs detailed image quality settings.
• Image Identify
This function discerns between the natural image display section and the text display section, and performs correction to enable an
optimized display for each.
Each time
On
Off
Press
to store.
Adjusting the Color Temp.
Use
or
following sequence:
[–3500]:More reddish colors
[+3500]:More bluish colors
[User]:User Color Temp. setup
Press
: to store.
Setting User Color Temp.
Use
or
Press
: to strengthen the selected color.
Press
: to weaken the selected color.
Press
to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
Downloaded From projector-manual.com Fujitsu Manuals
or
is pressed, the setting is switched.
to specify a desired color temperature. Each time you press
to select Red, Green, or Blue, and adjust the color temp. for each.
or
, one of the available choices appears in the
E-43
Advertisement
Table of Contents
