Other Adjustments - Fujitsu LPF-D711W User Manual

OTHER ADJUSTMENTS

• FEATURES setup screen has the following 6 options.
See Page E-39 for the basic operation procedures.
[Set Up]: Can make lens shift, screen reverse and keystone adjustments. (See P. E-35.)
[Zoom/Focus]: Can adjust the size and focus of the picture. (See P. E-35.)
[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. (See P. E-47.)
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-48.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-49.)
[Others]: Used to make Screen Orbiter and other settings. (See P. E-50–E-52.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with
Adjustment Item
Dot Clock
(mD-sub)
Clock Phase
(mD-sub)
Clamp Position
(mD-sub Comp.
video)
Auto Calibration
(mD-sub)
Downloaded From projector-manual.com Fujitsu Manuals
, and then adjust with
Contents of Adjustments
You may find the vertically-striped pattern in pictures,
depending on the clock frequency of your PC's processor.
If you experience blurring, you can obtain a clearer picture by
adjusting the "Dot Clock".
Pictures and the outline of letters may blur or flicker as the
clock phase of your PC may be different. In this case, adjust the
clock phase manually. Normally, the automatic setting ensures
the optimal value.
Adjusts the extremely dark or bright pictures. Normally, the
automatic setting ensures the optimal value.
Adjusts the dynamic range of images to the optimum.
Performed while a white screen signal is received.
. Finally, press to implement the adjustments.
Use
striped pattern in pictures.
Use
Use
Display the Auto Calibration screen and select
Execute, and then use
item.
Operation
to adjust to minimize vertically-
to adjust to minimize pictures blur.
to adjust pictures optimally.
to select the
E-47