Fujitsu LPF-D711W User Manual page 25

SATELLITE TUNER
• Connect the picture signal cable to any one of the HDMI input terminal, component picture input terminal, S picture input terminal, or
picture input terminal.
• When the equipment to be connected is equipped with the HDMI output terminal or the component picture output terminal, connection to
either of these terminals is recommended.
To HDMI output
To component video output
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• The projector unit has no speaker function. To produce sound, connect it to an external amplifier.
Downloaded From projector-manual.com Fujitsu Manuals
UHF Antenna
To video output
To S-video output
To audio outputs
To HDMI input
BS/110-degree CS Antenna
To S-video input
To audio
To video input
inputs
Rear side of AV Selector
To component video input
E-25