PART NAMES AND FUNCTIONS
PROJECTOR SECTION - FRONT
PROJECTOR SECTION - REAR
E-12
Downloaded From projector-manual.com Fujitsu Manuals
Remote control signal receiver
Receives signals from the remote control.
Projector lens
Adjuster (for front end)
Adjusts the height of projector.
Display input (PICTURE) terminal (DISPLAY INPUT)
Connect this terminal to the display output (PICTURE) terminal on
the AV selector using the special cable provided.
/l power switch
If this switch is pressed when the power indicator lamp is off, the
indicator lamp will light.
The power can be turned on and the standby mode selected by
using the remote control or the control panel of the display . If this
switch pressed when the power indicator monitor is lit will go out.
Power input terminal
Connect the power cable supplied with the projector to this
terminal.
Adjusters (for rear end)
Adjust the height of projector.