Replacing The Fdd Unit - Sharp UP-5350 Installation Manual

8. Replacing the LCD unit
Install the LCD unit in the reverse order of removing.
Before installing, make sure that each cables are connected securely.

9. Replacing the FDD unit

1) Remove to the Printer lid .
a) Remove the screw .
b) Remove the printer lid .
2) Remove the bottom plate .
a) Remove the three screws
b) Remove the bottom plate
3) Remove the FDD cover .
4) Install the FDD ANGLE-A .
a) Install the two FDD ANGLE-A
FDD UNIT with the four screws
5) Connect the FDD CABLE to the FDD UNIT
6) Install the ferrite core onto the FDD cable
.
.
and EARTH WIRE to the
.
.
.
7) Install the FDD UNIT to the UP-5350.
a) Install the FDD UNIT and FDD ANGLE-B
cabinet with the four screws
b) Connect the FDD CABLE
c) Pass the EARTH WIRE
d) Install the EARTH WIRE
11
15
10
15
A
16
10
8) Install the FDD COVER to the FDD FRONT COVER
to the bottom
.
to the Main PWB.
through the hole .
with the screw .
14
17
13
.