Sharp UP-5350 Installation Manual page 17

3) Attach the keyboard cover
cabinet, and fix them with four screws .
2
When attaching keyboard cover , engage pawls C and D securely
with the upper cabinet.
and keyboard unit to theupper
2
4
4
4) How to wire cables:
Run the cable along the mark-off line of the cabinet and secure it
at three points with filament tape.
However, remember that on products that will be manufactured in
June 2000 and after, the cable will be secured with clamps.
5) Connect the cable of the keyboard unit
nector CN10.
6) Attach the earth spring to the lower cabinet with thescrew .
to the main PWB con-
6
5