Operation; On-Off Switch; Adjust The Height Of The Trimmer - Yardworks 60-2241-0 Owner's Manual

Operation

On–Off Switch (Fig. I)
WARNING
To avoid injury:
• Do not push the Lock-OFF button down or squeeze the
trigger while the grass trimmer is upside-down.
• Do not carry the grass trimmer with a finger on the switch.
Avoid unintentional starting.
To Turn the Grass Trimmer On:
1. Press and hold the Lock-OFF button (1).
2. Squeeze the trigger switch (2).
3. Release the Lock-OFF button. The grass trimmer will stay
ON as long as the trigger switch is squeezed.
To Turn the Grass Trimmer Off:
1. Release the trigger switch (2).
2. Allow at least 5 seconds for the cutting spool to stop rotating.
3. The grass trimmer will be locked OFF until he Lock-OFF
button is pressed again.
Adjust the Height of the Trimmer (Fig.J)
1. UNLOCK the height adjuster by sliding the button down
toward the motor.
2. Position the trimmer to the desired height.
3. Release the height adjuster button in order to lock it into position.
Edging Feature (Fig.K)
This trimmer is equipped with an edging feature.
1. To rotate the handle, depress the yellow button (1), and turn the
handle 180 degrees, until it locks into place.
2. Rotate the auxiliary handle (2) 180 degrees in order to align it
at the front of the trimmer handle. To rotate the handle, loosen the
auxiliary handle tension knob (4) until handle and the holder can
be turned easily.
3. Pull the edging guide (3) down until it locks into place.
CAUTION
Always allow at least 5 seconds for the cutting line spool
to stop rotating after releasing the trigger switch.
Do not turn the grass trimmer upside down or place your
hands under the protective guard until the grass trimmer
spool has come to a complete stop.
10
1
2
4
3
2
Fig.I
Fig. J
1
Fig. K
CAUTIO