Matrix mvBlueFOX3 Technical Manual page 1609

21 Appendix A.2 CMOS specific camera / sensor data
TimerDuration
TimerDelay
TimerValue
TimerReset@i
Feature Name
AnalogControl
mvTapBalancingMode
0.000 UINT_MAX -
0.000 UINT_MAX -
0.000 UINT_MAX -
- - -
Min Max Inc
- - -
-
-
-
-
Valid
Documentation
Values
A category that contains
the Analog control
features.
mvFactory, States where the tap
mvUser balancing calibration data
does come from
mvFactory: States where
the tap balancing
calibration data does
Edge of the selected
trigger signal.
FallingEdge: Starts
counting on the Falling
Edge of the selected
trigger signal.
AnyEdge: Starts counting
on the Falling or Rising
Edge of the selected
trigger signal.
LevelHigh: Counts as
long as the selected
trigger signal level is
High.
LevelLow: Counts as
long as the selected
trigger signal level is
Low.
Sets the duration (in
microseconds) of the
Timer pulse. (us)
Sets the duration (in
microseconds) of the
delay to apply at the
reception of a trigger
before starting the Timer.
(us)
Reads or writes the
current value (in
microseconds) of the
selected Timer. (us)
Does a software reset of
the selected timer and
starts it. The timer starts
immediately after the
reset unless a timer
trigger is active.
1601