Matrix mvBlueFOX3 Technical Manual page 1608

TimerTriggerActivation
1600
21 Appendix A.2 CMOS specific camera / sensor data
- - - RisingEdge,
FallingEdge,
AnyEdge,
LevelHigh,
LevelLow
Counter End.
Counter3End: Starts with
the reception of the
Counter End.
Counter4End: Starts with
the reception of the
Counter End.
Timer1End: Starts with
the reception of the Timer
End. Note that a timer
can retrigger itself to
achieve a free running
Timer.
Timer2End: Starts with
the reception of the Timer
End. Note that a timer
can retrigger itself to
achieve a free running
Timer.
mvLogicGateOR1Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR2Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR3Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR4Output:
Selects the source of the
trigger to start the Timer.
UserOutput0: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput1: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput2: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput3: Specifies
which User Output bit
signal to use as internal
source for the trigger.
Selects the activation
mode of the trigger to
start the Timer.
RisingEdge: Starts
counting on the Rising