Matrix mvBlueFOX3 Technical Manual page 1531

21 Appendix A.2 CMOS specific camera / sensor data
mvU3VLNKErrorCount 0
Feature Name
UserSetControl
UserSetSelector
UserSetLoad@i
UserSetSave@i
UserSetDefault
UserSetDefaultSelector -
INT64_MAX 1
Valid
Min Max Inc
Values
Default,
UserSet1,
- - - UserSet2,
UserSet3,
UserSet4
- - - -
- - - -
Default,
UserSet1,
- - - UserSet2,
UserSet3,
UserSet4
Default,
UserSet1,
- - UserSet2,
UserSet3,
UserSet4
on the PHY interface.
Counts the number of errors
-
on the USB3 link.
Documentation
A category that contains the User Set
control features.
Selects the feature User Set to load,
save or configure.
Default: Selects the factory setting user
set.
UserSet1: Selects the user set 1.
UserSet2: Selects the user set 2.
UserSet3: Selects the user set 3.
UserSet4: Selects the user set 4.
Loads the User Set specified by
UserSetSelector to the device and
makes it active.
Save the User Set specified by
UserSetSelector to the non-volatile
memory of the device.
Selects the feature User Set to load
and make active by default when the
device is reset.
Default: Select the factory setting user
set.
UserSet1: Select the user set 1.
UserSet2: Select the user set 2.
UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
This feature is deprecated (See
UserSetDefault). Selects the feature
User Set to load and make active when
the device is reset.
Default: Select the factory setting user
set.
UserSet1: Select the user set 1.
UserSet2: Select the user set 2.
UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
1523