Matrix mvBlueFOX3 Technical Manual page 1851

21 Appendix A.2 CMOS specific camera / sensor data
TimerReset@i
Feature Name
AnalogControl
mvTapBalancingMode
GainSelector
- - -
Min Max
- -
- -
-
Valid
Inc
Values
A category that
contains the Analog
control features.
States where the tap
balancing calibration
data does come from
mvFactory: States
where the tap balancing
mvFactory,
- calibration data does
mvUser
come from
mvUser: States where
the tap balancing
calibration data does
come from
- AnalogAll, Selects which Gain is
DigitalAll, controlled by the
AnalogTap1, various Gain features.
AnalogTap2, AnalogAll: Gain will be
AnalogTap3, applied to all analog
AnalogTap4, channels or taps.
DigitalTap1, DigitalAll: Gain will be
DigitalTap2, applied to all digital
DigitalTap3, channels or taps.
DigitalTap4 AnalogTap1: Analog
gain will be applied to
Tap 1.
AnalogTap2: Analog
gain will be applied to
Tap 2.
AnalogTap3: Analog
gain will be applied to
Tap 3.
AnalogTap4: Analog
gain will be applied to
Tap 4.
DigitalTap1: Digital gain
will be applied to Tap 1.
DigitalTap2: Digital gain
will be applied to Tap 2.
microseconds) of the
selected Timer. (us)
Does a software reset of
the selected timer and
starts it. The timer starts
immediately after the
reset unless a timer
trigger is active.
Documentation
1843