Matrix mvBlueFOX3 Technical Manual page 1488

Feature Name
EventControl
EventSelector
EventNotification
Feature Name
EventTestData
EventTest
1480
Min Max Inc Valid Values
ExposureEnd,
Line4RisingEdge,
- - -
Line5RisingEdge,
FrameEnd
Off,
- - -
On
Min Max
0x0 0xffff
21 Appendix A.2 CMOS specific camera / sensor data
Default, This feature is deprecated (See
UserSet1, UserSetDefault). Selects the feature
UserSet2, User Set to load and make active when
UserSet3, the device is reset.
UserSet4 Default: Select the factory setting user
set.
UserSet1: Select the user set 1.
UserSet2: Select the user set 2.
UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
A category that contains Event
control features.
Selects which Event to signal to the
host application.
ExposureEnd: Device just
completed the exposure of one
Frame (or Line).
Line4RisingEdge: The event will be
generated when a Rising Edge is
detected on the Line 4.
Line5RisingEdge: The event will be
generated when a Rising Edge is
detected on the Line 5.
FrameEnd: Device just completed
the capture of one Frame.
Activate or deactivate the
notification to the host application of
the occurrence of the selected
Event.
Off: The selected Event notification
is disabled.
On: The selected Event notification
is enabled.
Valid
Inc
Values
A category that contains all the
data features related to the
EventTest event.
0x1 - Returns the unique identifier of
the Event Test type of event
generated using the
TestEventGenerate command. It
can be used to register a callback
function to be notified of the
EventTest event occurrence. Its
value uniquely identifies that the
Documentation
Documentation