Matrix mvBlueFOX3 Technical Manual page 1844

CounterEventActivation
CounterResetSource
1836
21 Appendix A.2 CMOS specific camera / sensor data
- -
- -
RisingEdge,
- FallingEdge,
AnyEdge
- Off,
AcquisitionStart,
AcquisitionEnd,
FrameStart,
FrameEnd,
ExposureStart,
ExposureEnd,
Line4,
Line5,
Counter1End,
Counter2End,
Counter3End,
Counter4End,
Timer1End,
Timer2End,
mvLogicGateOR1Output,
mvLogicGateOR2Output,
mvLogicGateOR3Output,
mvLogicGateOR4Output,
UserOutput0,
UserOutput1,
UserOutput2,
UserOutput3
be the source to
increment the Counter.
mvLogicGateOR3Output:
Select the events that will
be the source to
increment the Counter.
mvLogicGateOR4Output:
Select the events that will
be the source to
increment the Counter.
Selects the Activation
mode Event Source
signal.
RisingEdge: Counts on
the Rising Edge of the
signal.
FallingEdge: Counts on
the Falling Edge of the
signal.
AnyEdge: Counts on the
Falling or rising Edge of
the selected signal.
Selects the signals that
will be the source to reset
the Counter.
Off: Disable the Counter
Reset trigger.
AcquisitionStart: Resets
with the reception of the
Acquisition Start.
AcquisitionEnd: Resets
with the reception of the
Acquisition End.
FrameStart: Resets with
the reception of the
Frame Start.
FrameEnd: Resets with
the reception of the
Frame End.
ExposureStart: Resets
with the reception of the
Exposure Start.
ExposureEnd: Resets
with the reception of the
Exposure End.
Line4: Resets by the
chosen I/O Line.
Line5: Resets by the
chosen I/O Line.
Counter1End: Resets
with the reception of the