5.3.6 Setting Address Number - Communicating with External Devices
Communicating with an external device requires an address set on the PV inverter.
Otherwise, this setting is not required.
Display panel
SETUP
ADDR ESS
1
SETUP
ADDRESS
2
( 0 1 )
Flashing
Procedure
1. Press the MODE switch several times
until the "SETUP" mode is displayed.
2. Press the SELECT switch to enter
the "ADDRESS" mode.
・"ADDRESS" is displayed on the
lower row of the LCD.
Press the ENTER switch.
・Your PV inverter is now ready for
setting address number. The sec-
tion in which you can set address
number starts flashing.
76