Table of Contents
Advertisement
Available languages
Available languages
Display
PLEA
SE CLEAN
F I
L
T
E
R
!
flashes.
PLEA
SE CLEAN
F I
L
T
E
R
!
continues flashing.
The ENTER switch
does not turn off
the prompt.
Low output power
NO DATE / T I ME SET
PRESS ENTER !
flashes.
If, even after the above illustrated actions have been taken, the error persists,
please do as follows and then contact your dealer for repair or checkup.
Press and hold the POWER switch for at least 2 seconds to stop the PV
●
inverter.
Turn off the AC and DC disconnectors.
●
Cause
This flashes at fixed
intervals to ask you
to check whether the
ventilation opening
is clogged.
Is the ventilation
opening clogged?
The internal
temperature is too
high.
Is the ventilation
opening clogged?
Is the ventilation
opening clogged?
No current date and
time are set.
83
Remedy
Press the ENTER switch.
The "PLEASE CLEAN
FILTER!" stops flashing.
Then, see p. 79 to clean the
ventilation openings.
See p. 79 to clean the
ventilation openings. When it
reverts to its normal level, the
"PLEASE CLEAN FILTER!"
will be off.
See p. 79 to clean the ventilation
openings.
Press the ENTER switch.
This brings up the screen for
setting the date and time. Set
the date and time. The
subsection "5.3.3 Setting
Current Date and Time" (p.
73) serves as a reference.
pp.1-48
pp.1-48
pp.1-48
Advertisement
Chapters
Table of Contents
