Operating The Pv Inverter; (Pv-Pns04Atl-Ger / Pv-Pns06Atl-Ger); Operating Procedure; Start (Turn On) - Mitsubishi Electric PV-PNS04ATL-GER Operation Manual

5 Operating the PV Inverter

(PV-PNS04ATL-GER / PV-PNS06ATL-GER)

The following illustrates the operation of the PV inverter.

5.1 Operating Procedure

The operating procedure to start or stop the PV inverter is illustrated below.

5.1.1 Start (Turn on)

Display panel
1
2
PLEASE WA I T . . .
(For: Preparing itself for running)
RUNN I NG
3
(For: Running with the grid connected)
After turning on inverter, the PV inverter automatically runs depending on
amount of sunlight.
START
1 2 3 4 5 kWh
1 2 3 4 5 kWh
Procedure
When the PV inverter is inactive, press
and hold the POWER switch for 2 sec-
onds or longer.
・The PV inverter starts up, with the
"gate" displayed on the LCD starting
to open.
The LCD displays "START" for 3 sec-
onds, and then switches to the display
in STATUS mode.
Afterwards the LCD displays informa-
tion such as messages, state of power
generation, total generated energy,
etc., available in its modes of operation.
For details, refer to "5.2 Viewing
Operating Status".
59
pp.1-48
pp.1-48
pp.1-48