Viewing Operating Status; Viewing Lcd And Leds - Mitsubishi Electric PV-PNS04ATL-GER Operation Manual

5.2 Viewing Operating Status

The PV inverter displays on its LCD and LEDs the status as dictated
by its operating condition in that instance. All of the LCD and LEDs
are off during the night or at a time when little sunlight is present. This
is caused by the power source turned off on the PV inverter.

5.2.1 Viewing LCD and LEDs

Each operating status displayed on the LCD and LEDs is listed below.
※ LED:
※ A numerical value is shown on the lower right-hand side of the LCD
representing the generated energy in kWh.
STOP
(Turn off)
LCD
(Display is off)
denotes on,
LED
POWER GRID ERROR
denotes flashing, and
Description
The LCD and all LEDs are off
during times in which (1) little
sunlight is present such as at
night, or (2) the DC disconnec-
tor is off. This is caused by the
power source turned off on the
PV inverter.
The PV inverter has "stopped"
running.
Operating the POWER switch
will turn on the PV inverter.
61
denotes off.
pp.1-48
pp.1-48
pp.1-48