Lcd Monitor - Panasonic SDR-S10P Operating Instructions Manual

Setup
≥ These settings will not affect the
images actually recorded.
Increasing and decreasing
the brightness of the entire

LCD monitor

Press the MENU button, then
select [SETUP] # [POWER LCD]
# [ON] and then press the cursor
button in the center.
The [ ] indication appears on the LCD
monitor.
≥ Set [POWER LCD] to [ON] if the
surroundings are bright and the LCD
monitor is difficult to see. The entire
LCD monitor will become approx. twice
as bright as usual.
To cancel POWER LCD
Press the MENU button then select
[SETUP] # [POWER LCD] # [OFF] and
then press the cursor button in the
center.
≥ The [ ] indication disappears and
the original brightness is restored.
≥ This will not affect the images to be
recorded.
≥ If you turn on the unit when the AC
adaptor is used, this function will
automatically be activated.
42
VQT1D97