With A Tv; Playback On Tv - Panasonic SDR-S10P Operating Instructions Manual

With other products

With a TV

Playback on TV

The motion pictures and still pictures
recorded by this unit can be played back
on a TV.
≥ Use the AC adaptor to free you from
worrying about the battery running down.
1
Slide the terminal cover lock
to OPEN and then open the
terminal cover.
2
Connect this unit to the TV.
A AV cable (supplied)
≥ Insert the plugs as far as they will
go.
≥ Do not use any other AV cables
except the supplied one.
VIDEO IN
AUDIO IN
A
3
Rotate the mode dial to select
or .
4
Change the input channel on
the TV.
≥ The channel set will differ
depending on the terminal to which
the unit is connected.
5
Start playback on this unit.
The image and audio are output on
the TV.
∫ If the image or audio from
this unit is not output on
the TV
≥ Check that the plugs are inserted as
far as they can go.
≥ Check the connected terminal.
≥ Check the TV's input setting (input
switch). (For more information,
please read the operating
instructions for the TV.)
≥ If you have a TV with an SD card slot,
the motion pictures and still pictures
recorded on the SD card maybe
played back on the TV. (Refer to the
operating instructions of the TV for
details about TV compatibility.)
≥ If the images are not displayed
correctly on a wide-screen TV, adjust
the aspect setting on the TV. (Refer to
the operating instructions of the TV for
details.) If the pictures are displayed
squeezed horizontally on a regular TV
(4:3), change the [TV ASPECT] setting
on this unit. (l 76)
With other products
75
VQT1D97