To Disconnect The Usb Cable Safely; Software Uninstallation - Panasonic SDR-S10P Operating Instructions Manual

To disconnect the USB
cable safely
1
Double click the
the task tray displayed on the
computer screen.
Hardware disconnect dialog
appears.
≥ Depending on your computer's
settings, this icon may not be
displayed.
2
Select [USB Mass Storage
Device] and click [Stop].
3
Verify [MATSHITA SD Video
Camera USB Device] is
selected and click [OK].
Click [Close] and you can safely
disconnect the cable.
≥ If you disconnect the USB cable while
the card access lamp is on or while
appears on the LCD monitor, it may
damage the data.

Software uninstallation

Follow the steps below to uninstall the
software if it is no longer required.
icon in
1
2
Select [start] # ([Settings] #)
[Control Panel] # [Add or
Remove Programs
(Applications)].
Select [MotionSD STUDIO
1.2E], then click [Change/
Remove]
([Change or Remove] or
[Add/Remove]).
≥ Proceed with the uninstallation by
following the on-screen
instructions.
≥ After uninstalling the software, be
sure to reboot the computer.
With a computer
93
VQT1D97